Seguem-se os documentos ou os endereços eletrônicos indicados pelo respectivo Ponto Focal:

"Dokumentmmer. Dokumentart. Titel (Englisch)":

DIN 4070-1. 1958-01-00. ST*N. Softwood; cross-sectional dimensions and static values for sawn timber, square timber stock and roof battens.

DIN 4070-2. 1963-10-00. ST*N. Coniferous timber; dimensions of cross-sections and static values, goods sawn for dimensions and specification.

DIN 4071-1. 1977-04-00. ST*N*PW. Unplaned boards and planks made of coniferous timber; dimensions.

DIN 4072. 1977-08-00. ST*N. Boards tongued and grooved made of coniferous timber.

DIN 4073-1. 1977-04-00. ST*N*PW.Planed boards and planks made of coniferous timber; dimensions.

DIN 4074-1. 2003-06-00. ST*N. Strength grading of wood - Part 1: Coniferous sawn timber. This standard is applicable for coniferous sawn timber for components, which must be measured according to their strength. It specifies grading characteristics and classes as a precondition for the specification and application of calculation values for the verification of limiting strength and usability according to DIN 1052 or Din 1074. Grading may be done by two methods : - visually with grading classes ( according to clause 6) - machine grading with strength classes (according to clause 7). For special use of timber special standards are applicable regarding the strength grading : DIN 68326 and DIN EN 131-2 for wooden ladders, DIN 15147 for flat pallets.

DIN 4074-2. 1958-12-00. ST*N. Building Timber for Wood Building Components; Quality Conditions for Building Logs (Softwood).

DIN 4074-3. 2003-06-00. ST*N. Strength grading of wood - Part 3: Grading machines for sawn timber, requirements and testing. This standard specifies requirements and test methods for grading machines for sawn timber according to DIN 4074-1 and DIN 4074-5. Th purpose of this method is to ensure the correct operation of these grading machines.

DIN 4074-4. 2003-06-00. ST*N. Strength grading of wood - Part 4: Certificate of suitability for machine grading. This standard specifies how the suitablility for machine strength grading has to be certified. With this certification it shall be ensured that firms, which practice machine grading according to DIN 4074-1 and DIN 4074-5, have the required suitability.

DIN 4074-5. 2003-06-00. ST*N. Strength grading of wood - Part 5: Sawn hard wood / Note: Applies in conjunction with DIN 6779-1 and DIN 6779-2. This standard is applicable for sawn hard wood for components, which must be measured according to their strength. It specifies grading characteristics and classes as a precondition for the specification and application of calculation values for the verification of limiting strength and usability according to DIN 1052 or Din 1074. Grading may be done by two methods : - visually with grading classes ( according to clause 5) - machine grading with strength classes (according to clause 6). For special use of timber special standards are applicable regarding the strength grading : DIN 68326 and DIN EN 131-2 for wooden ladders, DIN 15147 for flat pallets.

DIN 4076-1. 1985-10-00. ST*N. Terms and symbols in the field of wood; species of wood. The standard lists for 257 species of softwood (conventionally, timber of coniferous trees) and hardwood (conventionally, broad-leaved trees) in normal commercial usage the standard names, symbols, trade names, botanical names, density, and sources of supply.

DIN 52180-1. 1977-11-00. ST*N. Testing of wood; sampling and cutting, principles.

DIN 52181. 1975-08-00. ST*N*PW. Determination of growth properties of coniferous sawn timber.

DIN 52182. 1976-09-00. ST*N. Testing of wood; determination of density.

DIN 52183. 1977-11-00. ST*N. Testing of wood; determination of moisture content.

DIN 52184. 1979-05-00. ST*N. Testing of wood; determination of swelling and shrinkage.

DIN 52185. 1976-09-00. ST*N. Testing of wood; compression test parallel to grain.

DIN 52186. 1978-06-00. ST*N. Testing of wood; bending test.

DIN 52187. 1979-05-00. ST*N. Testing of wood; determination of ultimate shearing stress parallel to grain.

DIN 52188. 1979-05-00. ST*N. Testing of wood; determination of ultimate tensile stress parallel to grain.

DIN 52189-1. 1981-12-00. ST*N. Testing of wood; Impact bending test; Determination of impact bending strength.

DIN 52192. 979-05-00. ST*N. Testing of wood; compression test perpendicular to grain.

DIN 68122. 1977-08-00. ST*N. Chamfered boards tongued and grooved made of coniferous timber.

DIN 68123. 1977-08-00. ST*N. Weatherboards made of coniferous timber.

DIN 68126-1. 1983-07-00. ST*N. Profile boards with chamfer and broad root; dimensions. Note: To be replaced by DIN EN 14519 (2002-09, t).

DIN 68127. 1970-08-00. ST*N. Acoustic boards.

DIN 68140. 1971-10-00. ST*N*PR. Wood Finger-jointing.

DIN 68140-1. 1998-02-00. ST*N. Wood finger-jointing - Part 1: Finger jointing of softwood for load-bearing structures. The document applies to longitudinal jointing of coniferous solid wood for load-bearing and stiffening timber structures according to DIN 1052-1.

DIN 68201. 1959-07-00. ST*N. Cutting waste of wood; definitions and mathematical calculation methods.

DIN 68250. 1970-08-00. ST*N*PW. Measurement of coniferous sawn timber.

DIN 68252-1. 1978-01-00. ST*N*PR*PW. Sawn timber terms; form and dimensions.

DIN 68255. 1979-03-00. ST*N. Sawn timber transportation packages.

DIN 68364. 2003-05-00. ST*N. Properties of wood species - Density, modulus of elasticity and strength. This Standard includes characteristic values of the density, bending modulus of elasticity and certain strength parameters determined on small sound samples conditioned at standard atmosphere and serves to compare different wood species. The characteristic strength and elasticity values are not directly applicable to structural timber, to that see DIN EN 388. Shrinkage and swelling dimensions see DIN 68100. Natural durability and treatability see DIN EN 350-2, symbols see DIN EN 13556.

DIN 68365. 1957-11-00. ST*N. Structural timber for carpentry; quality conditions.

DIN 68368. 1975-11-00. ST*N*PW. Sawn timber of broadleaved species for stairs; quality requirements.

DIN 68371. 1975-11-00. ST*VN*PW. Measurement of sawn timber of broadleaved species.

DIN EN 335-1. 2004-11-00. DC*N-E. Durability of wood and wood-based products - Definition of use classes - Part 1: General; German version prEN 335-1:2004 / Note: Intended as replacement for DIN EN 335-1 (1992-09). This part of EN 335 defines five use classes which represent the different service situations to which wood and wood-based products can be exposed. This part of EN 335 also indicates the biological agents relevant to each situation. Annex A gives information on these biological agents.

DIN EN 335-1. 1992-09-00. ST*N*PW. Durability of wood and derived materials; definition of hazard classes of biological attack; part 1: general; german version EN 335-1:1992 / Note: To be replaced by DIN EN 335-1 (2004-11). This document defines five hazard classes which represent the different service situations to which wood and wood-based products can be exposed. It also indicates the biological agencies relevant to each situation.

DIN EN 335-2. 2004-11-00. DC*N-E. Durability of wood and wood-based products - Definition of use classes - Part 2: Application to solid wood; German version prEN 335-2:2004 / Note: Applies only in conjunction with DIN EN 335-1*Intended as replacement for DIN EN 335-2 (1992-10). This Part of EN 335 gives guidance on the application of the use classes, as defined in Part 1 to solid wood of EN 335, in relation to the biological agents that can attack solid wood and solid wood panels. This Part should be used in conjunction with Part 1 of EN 335. Annex A gives information and guidance for the user to determine the appropriate use class and to select a suitable level of durability (either natural or conferred by preservative treatment). It does not give guidance on protective measures other than preservative treatment.

DIN EN 335-2. 1992-10-00. ST*N*PW. Durability of wood and derived materials; definition of hazard classes of biological attack; part 2: application to solid wood; german version EN 335-2:1992 / Note: To be replaced by DIN EN 335-2 (2004-11). This document gives guidance on the application to solid wood of the hazard classes, as defined in part 1 of DIN EN 335, in relation to the biological agencies that can attack solid wood. It shall be used in conjuction with part 1 of DIN EN 335.

DIN EN 335-3. 1995-09-00. ST*N. Durability of wood and wood-based products - Definition of hazard classes of biological attack - Part 3: Application to wood-based panels; German version EN 335-3:1995. The document gives guidance on the application to wood-based panels of the hazard classes, as defined in DIN EN 335-1, in relation to the biological agencies that can attack wood-based panels. DIN EN 335-3 shall be used in conjunction with DIN EN 335-1.

DIN EN 336. 2003-09-00. ST*N. Structural timber - Sizes, permitted deviations; German version EN 336:2003. This standard specifies two classes of permitted deviations from target sizes for strutural timber of softwood and hardwood species. It also specifies the moisture content to be used as a reference point for the measurement of sizes, and gives average values for changes in size due to changes in moisture content. It is applicable to sawn and prepared sqare-edged timber with parallel edges having sawn thickness or widths in the range of 22 mm to 300 mm.

DIN EN 338. 2003-09-00. ST*N. Timber structures - Strength classes; German version EN 338:2003. This standard establishes a system of strength classes for general use in structural codes. It gives characteristic strength and stiffness properties and density values for each class and the rules for allocation of timber populations (i.e. combinations of species, source and grade) to the class. This standard applies to all softwood and hardwood timber for structural use..

DIN EN 350-1. 1994-10-00. ST*N. Durability of wood and wood based products - Natural durability of solid wood - Part 1: Guide to the principles of testing and classification of the natural durability of wood; German version EN 350-1:1994. The document gives guidance on methods for the determination of the natural durability of untreated solid wood to attack by wood-destroying fungi, insects (beetles and termites), marine organisms and the classification of the wood species based on the results of these test methods.

DIN EN 350-2. 1994-10-00. ST*N. Durability of wood and wood based products - Natural durability of solid wood - Part 2: Guide to the natural durability and treatability of selected wood species of importance in Europe; German version EN 350-2:1994. The document lists the natural durability of solid wood for selected wood species, considered of importance to the countries within Europe for constructional purposes. It lists their relative durability to wood-destroying funge, dry wood-destroying beetles, termites, marine organisms. It also gives information relating to their treatability, origin, density and sapwood width.

DIN EN 351-1. 1995-08-00. ST*N. Durability of wood and wood-based products - Preservative-treated solid wood - Part 1: Classification of preservative penetration and retention; German version EN 351-1:1995. This document establishes a classification of preservative-treated wood in terms of penetration and retention of preservative.

DIN EN 351-2. 1995-08-00. ST*N. Durability of wood and wood-based products - Preservative-treated solid wood - Part 2: Guidance on sampling for the analysis of preservative-treated wood; German version EN 351-2:1995. This document gives guidance on the general procedures to be followed in the sampling for the analysis of preservative-treated wood to demonstrate that it conforms to the requirements of EN 351-1.

DIN EN 384. 2004-05-00. ST*N. Structural timber - Determination of characteristic values of mechanical properties and density; German version EN 384:2004. This standard gives a method for determining characteristic values of mechanical properties and density, for defined populations of timber of visual/or mechanical strength grades. A method is also given for checking the strength of a timber sample against its designated value. The values determined is in accordance with this standard for mechanical properties and density are suitable for assigning grade and species to the strength classes of EN 338.

DIN EN 385. 2002-03-00. ST*N. Finger jointed structural timber - Performance requirements and minimum production requirements; German version EN 385:2001. This standard specifies requirements for bonded finger joints and minimum requirements for the manufacture of cut, interlocking, bonding finger joints in structural timber members. Requirements are given for timber, adhesive, moisture content, cutting, bonding and preservative treatments and flame retardent treatment. This standard is only applicable to finger joints between timber members of the same species type. Although most finger joints are produced in coniferous species this standard also applies to broad leaved species where information is available to enable them to be satisfactorily bonded.

DIN EN 408. 2004-08-00. ST*N. Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties; German version EN 408:2003. This standard specifies for structural timber and glued laminated timber test methods for the determination of dimensions, moisture content, density and conditioning of test pieces.

DIN EN 460. 1994-10-00. ST*N. Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes; German version EN 460:1994. This document gives guidance on the selection of wood species based on their natural durability to attack by wood-destroying organisms for use as solid wood or as glued laminated timber (glulam) in the hazard classes defined in EN 335-1. It does not consider the durability characteristics of the glue used in glue laminated timber.

DIN EN 518. 1996-07-00. ST*N*PW. Structural timber, grading - Requirements for visual strength grading standards; German version EN 518:1995 / Note: To be replaced by DIN EN 14081-1 (2001-04). The document identifies the characteristics for which, as a minimum, limits shall be given in visual grading rules.

DIN EN 519. 1996-07-00. ST*N*PW. Structural timber, grading - Requirements for machine strength graded timber and grading machines; German version EN 519:1995. Note: To be replaced by DIN EN 14081-1 (2001-04). This document specifies the requirements for assessing and operating machine strength grading systems to strength structural timber, and laminates for glulam. In addition, guidance is given for the degree of quality control necessary to ensure the reliability of timber graded by strength grading machines. The requirements are given for both "machine controlled" and "output controlled" systems for grading timbe.

DIN EN 599-2. 1995-08-00. ST*N. Durability of wood and wood-based products - Performance of preventive wood preservatives as determined by biological tests - Part 2: Classification and labelling; German version EN 599-2:1995. This document specifies the requirements for classifying and labelling of wood preservatives according to their performance and suitability for use.

DIN EN 789. 1996-07-00. ST*N*PW. Timber structures - Test methods - Determination of mechanical properties for wood based panels; German version EN 789:1995. Note: To be replaced by DIN EN 789 (2003-11). This document specifies test methods for determining some mechanical properties of commercial wood-based panel products for use in load-bearing timber structures. These properties are intended for the calculation of "characteristic values" for use in obtaining material design values. For each type and grade of panel product, as defined for example in an EN wood based panel standard, it is necessary to determine characteristic values of mechanical properties to enable it to be used for structural purposes. This document details the necessary testing which may only need to be carried out once for each product, unless there is a reason to suspect a significant change has occurred in the properties of the product.

DIN EN 844-1. 1995-04-00. ST*N. Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber; German version EN 844-1:1995.
This document contains general terms used in European Standards relating to both round timber and sawn timber and the definitions of these terms.

DIN EN 844-2. 1997-08-00. ST*N. Round and sawn timber - Terminology - Part 2: General terms relating to round timber; German version EN 844-2:1997. The document defines general terms relating to round timber used in European Standards.

DIN EN 844-3. 1995-04-00. ST*N. Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber; German version EN 844-3:1995. This document contains general terms relating to sawn timber used in European Standards and the definitions of these terms.

DIN EN 844-4. 1997-08-00. ST*N. Round and sawn timber - Terminology - Part 4: Terms relating to moisture content; German version EN 844-4:1997. The document defines terms relating to moisture content used in European Standards.

DIN EN 844-5. 1997-08-00. ST*N. Round and sawn timber - Terminology - Part 5: Terms relating to dimensions of round timber; German version EN 844-5:1997. The document defines terms relating to dimensions of round timber used in European Standards.

DIN EN 844-6. 1997-08-00. ST*N. Round and sawn timber - Terminology - Part 6: Terms relating to dimensions of sawn timber; German version EN 844-6:1997. The document defines terms relating to dimensions of sawn timber used in European Standards.

DIN EN 844-7. 1997-08-00. ST*N. Round and sawn timber - Terminology - Part 7: Terms relating to anatomical structure of timber; German version EN 844-7:1997. The document defines terms relating to anatomical structure of timber used in European Standards.

DIN EN 844-8. 1997-08-00. ST*N. Round and sawn timber - Terminology - Part 8: Terms relating to features of round timber; German version EN 844-8:1997. The document defines terms relating to features of round timber used in European Standards.

DIN EN 844-9. 1997-08-00. ST*N. Round and sawn timber - Terminology - Part 9: Terms relating to features of sawn timber; German version EN 844-9:1997. The document defines terms relating to features of sawn timber used in European Standards.

DIN EN 844-10. 1998-06-00. ST*N. Round and sawn timber - Terminology - Part 10: Terms relating to stain and fungal attack; Trilingual version EN 844-10:1998. The document contains terms relating discolouration and fungal attack used in European Standards and the definitions of these terms.

DIN EN 844-11. 1998-06-00. ST*N. Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects; Trilingual version EN 844-11:1998. The document contains terms relating to degrade of timber by insects used in European Standards and the definitions of these terms.

DIN EN 844-12. 2001-03-00. ST*N. Round and sawn timber - Terminology - Part 12: Additional terms and general index; German version EN 844-12:2000. This document defines additional terms relating to round and sawn timber used in European Standards and contain the general index.

DIN EN 942. 1996-06-00. ST*N. Timber in joinery - General classification of timber quality; German version EN 942:1996. The document specifies the method to be used to determine the characteristics and classify the appearance quality of timber in joinery.

DIN EN 975-1. 1999-10-00. ST*N. Sawn timber - Appearance grading of hardwood - Part 1: Oak and beech (including Amendment 1:1999); German version EN 975-1:1995 + A1:1999. The document applies to green and dry sawn oak and beech. It specifies the method for determining the quality of appearance graded sawn timber. It describes various classes of temperate hardwood rough sawn and regularized timber for which it lays down denominations and definitions. It also gives rules for the composition and acceptance of batches.

DIN EN 975-2. 2004-09-00. ST*N. Sawn timber - Appearance grading of hardwoods - Part 2: Poplars; German version EN 975-2:2004. This standard defines appearance grades for European poplars. The standard applies to dry and green sawn timber, of thickness 15 mm up to 34 mm and of width 100 mm up to 250 mm measured in a green state. This standard does not apply to the strength grading of structural timber.

DIN EN 1309-1. 1997-08-00. ST*N. Round and sawn timber - Method of measurement of dimensions - Part 1: Sawn timber; German version EN 1309-1:1997. The document specifies the methods of measuring dimensions of sawn timber. It applies to hardwood and softwood sawn timber, both square edged and unedged. The document does not apply to tropical timber.

DIN EN 1309-2. 2004-09-00. DC*N-E. Round and sawn timber - Method of measurement of dimensions - Part 2: Round timber - Requirements for measurement and volume calculation rules; German version prEN 1309-2:2004. This European Standard defines the principles which are to be used in the derviation of round timber measurement and volume calculation rules. This standard applies to rules for measuring hardwood and softwood felled round timber. It does not apply to tropical timber.

DIN EN 1310. 1997-08-00. ST*N. Round and sawn timber - Method of measurement of features; German version EN 1310:1997. The document specifies the methods of measuring features taken into account in the visual grading of sawn, processed and round timber for appearance or to assess its mechanical properties. It does not apply to the strenght grading of structural timber (see EN 518 and EN 519).

DIN EN 1311. 1997-08-00. ST*N. Round and sawn timber - Method of measurement of biological degrade; German version EN 1311:1997. The document specifies the methods of measuring biological degradation (insect; fungi; etc.) taken into account in the visual grading of sawn timber and round timber for appearance or to assess its mechanical properties.

DIN EN 1312. 1997-06-00. ST*N. Round and sawn timber - Determination of the batch volume of sawn timber; German version EN 1312:1997. This document fixes the rules for the determination of the volume of sawn timber. It applies to the volume of a batch of similar or dissimilar pieces of sawn softwood or hardwood.

DIN EN 1313-1. 1999-11-00. ST*N. Round and sawn timber - Permitted deviations and preferred sizes - Part 1: Softwood sawn timber (including Amendment A1:1999); German version EN 1313-1:1997 + A1:1999. The document specifies permitted deviations for thicknesses and widths at a reference moisture content and adjustments for changes in size due to changes in moisture content. Preferred sizes for thicknesses of 38 mm and over are also specified. It applies to softwood sawn timber.

DIN EN 1313-2. 1999-01-00. ST*N. Round and sawn timber - Permitted deviations and preferred sizes - Part 2: Hardwood sawn timber; German version EN 1313-2:1998. The document specifies permitted deviations and preferred sizes of European hardwood sawn timber at a moisture content of 20%.

DIN EN 1315-1. 1997-06-00. ST*N. Dimensional classification - Part 1: Hardwood round timber; German version EN 1315-1:1997. This document specifies a general dimensional classification for felled hardwood timber.

DIN EN 1315-2. 1997-10-00. ST*N. Dimensional classification - Part 2: Softwood round timber; German version EN 1315-2:1997. The document specifies a dimensional classification for softwood round timber of which the future use is unknown.

DIN EN 1316-1. 1997-06-00. ST*N. Hardwood round timber - Qualitative classification - Part 1: Oak and beech; German version EN 1316-1:1997. The document specifies a qualitative classification and grade designations for felled round timber of oak and beech presented in the form of long poles or logs. The classifications describe quality classes of round timbers for which the intended use is not known.

DIN EN 1316-2. 1997-06-00. ST*N. Hardwood round timber - Qualitative classification - Part 2: Poplar; German version EN 1316-2:1997. The document specifies a qualitative classification and grade designations for felled round timber of poplar in the form of long poles or logs. The classifications describe quality classes of round timbers for which the intended use is not known.

DIN EN 1316-3. 1997-12-00. ST*N. Hardwood round timber - Qualitative classification - Part 3: Ash and maples and sycamore; German version EN 1316-3:1997. The document specifies a qualitative classification and grade designation for felled trees of ash (Fraxinus exelsior) and maples presented in the form of long poles or logs. The classifications describe quality classes of round timbers for which the intended use is not known. The maples classification is applied for the following species: sycamore maple (Acer pseudoplatanus) and maples (Acer platanoides), (Acer campestris).

DIN EN 1438. 1998-10-00. ST*N. Symbols for timber and wood based products; German version EN 1438:1998. The document defines a wide range of symbols for use in documents covering solid timber and all wood based materials. Clause 5 follows the layout of ISO 3898. All the symbols are presented as letter types in alphabetical order.

DIN EN 1611-1. 2002-11-00. ST*N. Sawn timber - Appearance grading of softwoods - Part 1: European spruces, firs, pines, Douglas firs and larches (including amendment 1:2002); German version EN 1611-1:1999 + A1:2002. This amendment gives the information that this standard applies also to European larches.

DIN EN 1611-2. 1996-05-00. DC*N-E. Sawn softwood - Visual grading - Part 2: Quality grading for European spruces and firs; German version prEN 1611-2:1995. The document defines classes of appearance grading of european spruces and firs according to general rules for softwood sawn timber given in prEN 1611-1. It applies to green and dried timber. It does not apply to the strength grading of structural timber.

DIN EN 1611-3. 1997-11-00. DC*N-E. Sawn softwood - Visual grading - Part 3: Quality grading for European pines; German version prEN 1611-3:1996. The document defines classes of appearance grading of European pines according to general rules for softwood sawn timber given in prEN 1611-1. It applies to green and dried timber. It does not apply to the strength grading of structural timber.

DIN EN 1912. 2004-06-00. DC*N-E. Structural timber - Strength classes - Assignment of visual grades and species; German version prEN 1912:2004. Note: Intended as replacement for DIN EN 1912 (1998-08). This European Standard lists visual strength grades, species and sources of timber, and specifies the strength classes from EN 338, to which they are assigned. Note: For the grades, species and sources included, there is long experience of use and/or satisfactory test data. The sources listed are therefore largely determined by existing commercial practice.

DIN EN 1912. 1998-08-00. ST*N*PW. Structural timber - Strength classes - Assignment of visual grades and species; German version EN 1912:1998. Note: To be replaced by DIN EN 1912 (2004-06). The document lists visual strength grades, species and sources of timber, and specifies the strength classes from EN 338, to which tey are assigned.

DIN V ENV 1927-1. 1999-03-00. ST*VN. Qualitative classification of softwood round timber - Part 1: Spruces and firs; German version ENV 1927-1:1998. The document specifies the qualitative classification for the roundwood of spruces (Picea spp) and firs (Abies spp).

DIN V ENV 1927-2. 1999-03-00. ST*VN. Qualitative classification of softwood round timber - Part 2: Pines; German version ENV 1927-2:1998. The document specifies the qualitative classification for the roundwood of pines. It applies to scots pine (Pinus sylvestris), Corsican or Austrian pine (Pinus nigra), maritime pine (Pinus pinaster) and radiata pine (Pinus radiata).

DIN V ENV 1927-3. 1999-03-00. ST*VN. Qualitative classification of softwood round timber - Part 3: Larches and douglas firs; German version ENV 1927-3:1998. The document specifies the qualitative classification for the roundwood of larch (Larix) and douglas fir (Pseudotsuga).

DIN V ENV 12169. 2000-08-00. ST*VN. Criteria for the assessment of conformity of a lot of sawn timber; German version ENV 12169:2000. The document defines the sampling plans and procedures for inspection of sawn timber lots by attributes and control regulations and conditions for acceptance or rejection of the lot in view of the agreed specification. it can applied to any square edged sawn timber product complying with specifications clearly defined in the sales contract. Sampling plans are applicables, but not limited to inspection of the quality of the lot.

DIN EN 12246. 1999-09-00. ST*N. Quality classification of timber used in pallets and packaging; German version EN 12246:1999. The document defines quality classes of timber used in industrial packaging and reusable pallets. Two classes P1 and P2 are defined with minimum requirements based on visual classification.

DIN EN 12248. 1999-09-00. ST*N. Sawn timber used in industrial packaging - Permitted deviations and preferential sizes; German version EN 12248:1999. The document specifies permitted deviations (due to variability in sawing and processing) from target thickness and widths for sawn timber used in industrial packaging when measured at a defined reference moisture content.

DIN EN 12249. 1999-09-00. ST*N. Sawn timber used in pallets - Permitted deviations and guidelines for dimensions; German version EN 12249:1999. The document specifies two classes of permitted deviations (due to variability in sawing and processing) from target thickness, widths and lengths for timber used in pallets when measured at a defined reference moisture content.

DIN EN 12490. 1999-01-00. ST*N. Durability of wood and wood-based products - Preservative-treated solid wood - Determination of the penetration and retention of creosote in treated wood; German version EN 12490:1998. The document specifies a method for determining the penetration and retention of creosote in timber freshly-treated with creosote, principically in order to ascertain whether the treated timber conforms to specifications written in terms of the European standard EN 351-1, it also provides guidance on the acquisition of test samples and their handling between sampling and analysis.

DIN EN 13145. 2001-04-00. ST*N. Railway applications - Track - Wood sleepers and bearers; German version EN 13145:2001. The document defines wood species, quality requirements, origin, manufacturing conditions, forms, dimensions and tolerances as well as the durability and preservation of wood sleepers and bearers for use in railway tracks. It does not cover specific finishing processes which may be required by the customer. It does not apply to other track timbers.

DIN EN 13183-1. 2002-07-00. ST*N. Moisture content of a piece of sawn timber - Part 1: Determination by oven dry method; German version EN 13183-1:2002. This European Standard defines the method for determining the moisture content of a piece of sawn timber. This method shall be considered as the reference method. This standard applies to sawn timber, and timber which has been planed or surfaced by other means.

DIN EN 13183-1 Berichtigung 1. 2003-12-00. ST*N. Corrigendum to DIN EN 13183-1:2002-07. This European Standard defines the method for determining the moisture content of a piece of sawn timber. This method is considered as the reference method. This standard applies to sawn timber, and timber which has been planed or mechanically surfaced by other means.

DIN EN 13183-2. 2002-07-00. ST*N. Moisture content of a piece of sawn timber - Part 2: Estimation by electrical resistance method; German version EN 13183-2:2002. This European Standard defines a non-destructive method for estimating the moisture content of a piece of timber using an electrical resistance meter. This standard applies to sawn timber, and timber which has been planed or surfaced by other means.

DIN EN 13183-2 Berichtigung 1. 2003-12-00. ST*N. Corrigenda to DIN EN 13183-2:2002-07. This European Standard defines a non-destructive method for estimating the moisture content of a piece of sawn timber using an electrical resistance moisture meter. This standard applies to sawn timber, and timber which has been planed or mechanically surfaced by other means.

DIN EN 13183-3. 2003-06-00. DC*N-E. Moisture content of a piece of sawn timber - Part 3: Estimation by capacitance method; German version prEN 13183-3:2003. The European Standard defines a non destructive method for estimating the moisture content of a piece of sawn timber. The standard describes the conditions which shall be met by a capacitance measuring system to derive a moisture content estimate for individual pieces of timber.The standard applies to sawn timber and timber which has been planed or surfaced by other means.

DIN EN 13556. 2003-10-00. ST*N. Round and sawn timber - Nomenclature of timbers used in Europe; Trilingual version EN 13556:2003. This European Standard lists commercial hardwood and softwood timbers used in Europe.

DIN EN 13912. 2000-08-00. DC*N-E. Wood and wood-based materials in stair components - Requirements; German version prEN 13912:2000. The document specifies requirements for the form, fit and assembly of joinery components in timber stairs, together with guidance in the selection of timber. It does not cover design, installation and structural reuirements.

DIN EN 14081-1. 2001-04-00. DC*N-E. Timber structures - Strength graded structural timber with rectangular cross section - Part 1: General requirements; German version prEN 14081-1:2000. Note: Intended as replacement for DIN EN 518 (1996-07), DIN EN 519 (1996-07). The document consist general requirements for strength graded structural timber with rectangular cross section for timber structures.

DIN EN 14081-2. 2001-04-00. DC*N-E. Timber structures - Strength graded structural timber with rectangular cross section - Part 2: Machine grading; Additional requirements for initial type testing; German version prEN 14081-2:2000.The document consists strength graded structural timber with rectangular cross section for timber structures. It specifies additional requirements for inital type testing.

DIN EN 14081-3. 2001-04-00. DC*N-E. Timber structures - Strength graded structural timber with rectangular cross section - Part 3: Machine grading; Additional requirements for factory production control; German version prEN 14081-3:2000. The document consists additional requirements for factory production control of strength graded structural timber for timber structures.

DIN EN 14081-4. 2003-08-00. DC*N-E. Timber structures - Strength graded structural timber with rectangular cross section - Part 4: Machine grading; Grading machine settings for machine controlled systems; German version prEN 14081-4:2003. The document gives settings, derived according to the requirements given in Part 2, for various grading machines, species and combinations of strength classes or grades.

DIN EN 14128. 2004-03-00. ST*N. Durability of wood and wood-based products - Performances criteria for curative wood preservatives as determined by biological tests; German version EN 14128:2003. This European Standard specifies the minimum performance requirements in biological tests for products for curative uses against specific wood destroying organisms. It specifies the biological tests required together with the performance criteria to be achieved in each test.

DIN EN 14251. 2004-04-00. ST*N. Structural round timber - Test methods; German version EN 14251:2003. This test standard specifies test methods for determining the following properties of structural round timber: bending strength, modulus of elasticity in bending, the compressive strength parallel to the grain and modulus of elasticity in compression parallel to the grain.

DIN EN 14298. 2001-12-00. DC*N-E. Sawn timber - Assessment of drying quality; German version prEN 14298:2001. This European standard defines a method of assessment of drying quality. It applies to lots of dried sawn timber or to dried timber which has been planed or surfaced by other means. It applies to both softwood and hardwood with a thickness not greater than 100 mm.

DIN EN 14358. 2002-03-00. DC*N-E. Structural timber - Calculation of characteristic 5-percentile value; German version prEN 14358:2002. The project lays down methods for the determination of characteristic 5-percentile values from test results and gives acceptance criteria for a sample.

DIN V ENV 14464. 2003-02-00. ST*VN. Sawn timber - Method for assessment of case-hardening; German version ENV 14464:2002. The document defines a destructive method of assessing the case hardening of a piece of timber with reference to the distorsion measured in a slice taken from the piece. This standard applies to sawn timber and timber which has been planed or surfaced by other means. It applies to both hardwood and softwood with a thickness not greater than 100 mm.

DIN EN 14544. 2002-11-00. DC*N-E. Timber structures - Strength graded structural timber with round cross-section - Requirements; German version prEN 14544:2002. The document lays down the requirements for visual graded structural timber with round cross-sections, barked or unbarked and cut on length but otherwise not machined. This standard specifies tolerances on sizes and identifies thev chracteristics for which, as a minimum, limits shall be given in visual grading rules. It also proposes two grades recommended where no national grades exist. Structural timber treated against fire or biological attack is not covered in this standard."